I/O Controller and I/F Management
| Part Number | Description | Package |
|---|
| F81486 | The F81486 is half-duplex RS485 transceiver that operates at maximum data rates of 20Mbps. The F81486 package is in 12-DFN (3x3 mm)… | 12 DFN (3mm x 3mm) |
| F81434 | The F81434 is a programmable, monolithic multi-protocol 2T/2R transceiver supporting RS-232 and RS-485 / RS-422 drivers and receivers in a 28 pin… | 28 QFN (4 mm x 4 mm) |
| F81212A | The F81212A is a 2 driver / 2 receiver RS-232 transceiver and intended for all EIA-232-E and V.28 communications interfaces. The F81212A… | 20-TSSOP (173 mil) |
| F81252 | The F81252 high-speed CAN FD transceiver provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN… | SOP-8 (150 mil) |
| F81212 | General Description: The F81212 is a 2 driver / 2 receiver RS-232 transceiver and intended for all EIA-232-E and V.28 communications interfaces.… | 16-TSSOP |
| F81436 | The F81436 is a 3 driver / 5 receiver RS-232 transceiver featuring a variable low voltage logic interface, down to 1.62V. The… | 40 QFN (5mm x 5mm) |
| F81435 | The F81435 is programmable, monolithic multi-protocol transceiver device that contains RS-232 and RS-485/RS-422 drivers and receivers. The F81435 can be reconfigured into… | 40 QFN (5mm x 5mm) |
| F81968 | The F81968 is the featured IO chip for Industrial PC system. Equipped with one IEEE 1284 parallel port, 6 UART ports with… | 128- LQFP (14mm x 14mm) |
| F81216A | The F81216A mainly provides 3 pure UART ports and one UART+ IR port through LPC. Each UART includes 16-byte send/receive FIFO, a… | 48 pin LQFP 、48-TQFP |
| F81216H | The F81216H mainly provides 3 pure UART ports and one UART+ IR port through LPC. Each UART includes 128-byte send/receive FIFO, a… | 48-LQFP (7mm x 7mm) |
| F85281 | F85281 is a smart device that is ideal for the analyzer application. F85281 is easy to make a diagnostic card for troubleshoot… | 48-pin TQFP (7mm x 7mm) |
| F81217 | The F81217 mainly provides 3 pure UART ports and one UART+ IR port through LPC. Each UART includes 16/32/64/128-byte send/receive FIFO, a… | 64 - TQFP (7mm x 7mm) |
| F81433A | The F81433A is a programmable, monolithic multi-protocol 1T/1R transceiver supporting RS-232 and RS-485 / RS-422 drivers and receivers in a 28 pin… | 28 QFN (4 mm x 4 mm) |
| F81536 | F81536 is the ideal bridge between USB to 12 UART controllers and which is complies with USB 2.0 as well as the… | 128-pin LQFP (14*14mm) |
| F81535 | F81535 is the ideal bridge between USB to Octa (8) UART controller and which is complies with USB 2.0 as well as… | 128-pin LQFP (14*14mm) |
| F81534A | F81534A is the ideal bridge for USB to quad UART controller which complies with USB 2.0 and standard serial port spec. Each… | 64-TQFP (7mm*7mm) |
| F81532A | F81532A is the ideal bridge between USB to dual UART controllers which complies with USB 2.0 and standard serial port specification. Each… | 64-TQFP (7mm*7mm) |
| F81251 | The F81251 is CAN bus Transceiver which is the interface between the Controller Area Network (CAN) protocol controller and the physical bus.… | SOP 8 package |