This smart device is the ideal bridge between USB 2.0 high speed (480Mbps) port to multi-interface such as UART/SPI/I2C & provide PWM functions as well. The F75115 supports 47 GPIO pins. The UART includes 128-byte send/receive FIFO, complete modem control capability, & an interrupt system. The master SPI interface can connect to two SPI devices. The F75115 can also support two I2C masters. The F75115 includes LDO regulators for internal usage. These features as above description will help you more and improve the product value. The F75115 is in the package of 64-pin TQFP (7*7mm).
F75115
- Package: 64-pin TQFP (7*7mm)
- Features:
- Multi Interface
- Support one UART controller (Fully UART controller is enabled by request)
- All UART Support HW Auto Flow Control Function
- 128-byte Receive/Send FIFO
- Support high baud rate
- Default TX/RX TTL level only
- Support USB 2.0 Specification High Speed (480Mbps)
- Support SPI interface (Two chip select pins)
- Support I2C interface (2 masters)
- Support one UART controller (Fully UART controller is enabled by request)
- Support up to 47 GPIO pins (Some are enabled by request)
- Support three PWM
- Built in LDO for internal usage
- Support External Crystal 12MHz
- Plug & Play Compatible
- Design Guarantee -40°C~85°C Industrial Temperature Range
- Support ESD Protection & Latch-up Free
- Package in 64-pin TQFP (7*7mm)
- Multi Interface