F75192 is a USB Type-C controller that complies with the latest USB Type-C and PD standards , which provides connection and polarity detection of Configuration Channel (CC) .It can also be used in many upstream and downstream facing port applications.
Through integration of all the required port terminations and threshold comparators required in all the Type-C port types, the F75192 provides a platform that can easily support any of the Type-C port types.
The F75192 also fully supports the increased power capabilities of the Type-C connector by implementing all the required components to detect the Type-C charging current levels as a device and to drive the required CC levels as a host. In addition to the Type-C charging current capabilities, the F75192 integrates the physical layer of the USB BMC power delivery protocol to allow up to 100W of power. The Biphase Mark Code(BMC) PD block enables full support for alternative interfaces of the Type-C specification.
- FEATURES
- PACKAGE
- ATTACHMENTS
l USB Power Delivery (PD) Controller
ü Support USB Type-C DFP Mode Configuration for Host and UFP Mode Configuration for Device.
ü Support FUN pin to select DFP Mode or UFP Mode.
ü LED pin can light external LED Indicator to show DFP Mode or UFP Mode.
ü Support H_VDD pin to sense VBUS voltage.
ü Support CTRL1/2 pins to change the request voltage (UFP mode).
ü Update firmware via CC1 with Bi-Phase Encoding(BMC).
ü Support Full PD Profile 0~5(5V/12V/20V) and Apple Type-C Profile (14.5V). Support Changing
the Value 5V to 20V of User-Defined.
l USB Type-C Specification Compliant
ü Support Current and Voltage Capability Detect Function by CS pin and H_VDD pin.
ü Assign CC and VCONN Pins.
ü Support Connection Detection on CC Pin.
ü Detect USB Cable Plug Attach.
ü Cable Orientation and Role Detection.
l Port Power Switch
ü Support VCONN power switch control.
ü EN_VBUS pin could enable the USB Power Switches for VBUS voltage (DFP mode).
ü EN_SINK pin could enable the switches for request VBUS voltage (UFP mode).
ü Support current limiter default 3A. Changing the current limiter Value of User-Defined.
ü Pull-up/down Resistor ( Rp / Rd ) Integrated.
ü Discharge VBUS Voltage could be performed by DIS_CHARGE Pin.
ü Over Voltage Protection (OVP) and Over Current Protection (OCP).