The F75204 is the combination of Hi-Speed USB data switches and a USB Dedicated Charger identification circuit. The F75204 support most of the USB Battery Charging Specification worldwide, including BC 1.2, Apple® charging spec (for i-Pad & i-Phones) and specs for Samsung Galaxy Tab. The F75204 also equipped with a control output to control peripheral power components.  

A digital input CB is able to control the mode configuration of F75204. In transmission mode, the F75204 acts like a USB bridge which connects the route between the USB Host and the USB Device, and allows device using CDP mode to charge the handheld devices; in the charger mode the F75204 can automatic detect the device and provide correct acknowledge signal to the device that is going to be charged, even if the computer system has been shut down.

By setting the USB Data pins (D+/D-) to the required voltage levels, the charging device recognize the voltage levels, and starts to draw the current to charge. The F75204 are equipped with a control output (CEN or CEN#) allows users to control the peripheral power management device which controls the charging current.

The F75204 Series enhanced ESD protection up to ±8kV on the DP and DM. The F75204 is available in a MSOP-8 Package and is allow working over the 0°C to +70°C temperature range.