|
The F75293A is low cost USB Dedicated Charger Identification Circuit IC which is so smart to recognize most of the mainstream handheld devices. It allows devices to draw current as much as using as the original adapter. The F75293A can support most of the USB Battery Charging Specification world w ide including BC1.2, Apple ® charging spec (for i Pad & i Phone) and spec for Samsung Galaxy Tab. Apple Inc. has upgraded its charger output capacity for tablets to 12W output (maximum 2.4A @ 5V). By setting the USB data pins (D+/D --) to the required voltage levels, the charging devices will recognize their required voltage levels, and starts to draw the suitable current to charge. The F75293A also supports USB high voltage dedicated charging port (HVDCP) interface IC for the Qualcomm Quick Charge TM 2.0 specification, and also compatible with Qualcomm® Quick Charge TM 3.0 Specification. Quick Charge 3.0 employs Intelligent Negotiation for Optimum Voltage (INOV), an algorithm which allows your portable device to determine what power level to request at any point in time, enabling optimum power transfer while maximizing efficiency. It also supports wider voltage options, allowing a mobile device to dynamically adjust to the ideal voltage level supported by that specific device. Specifically, Quick Charge 3.0 offers a more granular range of voltages: 200mV increments, from 3.6V to 20V. That way your phone can target one of dozens of power levels. The F75293A supports the full output voltage range of either Class A or Class B. The F75293A automatically detects whether a connected Powered Device is QC 3.0/2.0 capable before enabling output voltage adjustment. If a Powered Device not compliant to QC 3.0/2.0 is detected the F75293A disable the output voltage adjustment to ensure the safe operation with legacy 5V. The F75293A supports over voltage protection (OVP) and internal discharge function. When the output voltage exceeds 20% tolerance of the requested voltage after 40 μ s or the discharge function is failed, the FAULT# pin will show the pull down signal for shutting down the external power IC. HVEN pin can disable high voltage such as QC2.0/3.0. The user could light up LED for high voltage protocol such as QC2.0/3.0 and could also change QC Class A or Class B via pin 2 HV _ |
The F75293A is suitable for all charg er products with USB interface. It provides enhanced ESD protection on the DP and DM with the MSOP10 package. It requires minimum external components, which can reduce develop & production cost dramatically.
- FEATURES
- PACKAGE
- ATTACHMENTS
|
⚫ Fully Supports Qualcomm® Quick ChargeTM 3.0 (INOV) Specification. ✓ Class A: 3.6V~12 V Output Voltage. ✓ Class B: 3.6V~ 20 V Output Voltage. ✓ 0.2V for each step. ⚫ Compatible with Qualcomm® Quick ChargeTM 2.0 (HVDCP) Specification. ✓ Class A: 5 V, 9 V, 12 V Output Voltage. ✓ Class B: 5 V, 9 V, 12 V, and 20 V Output Voltage. ⚫ Support YD/T 1591-2009 Charging Spec. ⚫ Support 2.4A Apple® Devices Fast Charging. ⚫ USB Battery Charging Specification Revision 1.2 (BC 1.2) Compatible. ✓ Automatic USB DCP shorting D+ to D- line. ✓ Default 5V mode operation. ⚫ Low power consumption. ⚫ Support over voltage protection (OVP) and internal discharge function by FAULT# pin. ⚫ Support HVEN pin can disable high voltage such as QC2.0/3.0. ⚫ Support HV_ST# Pin for lighting indicator when get into QC 2.0/3.0 Specification. ⚫ Support HV_ST# Pin to select QC3.0/2.0 Specification Class A (default) or Class B. ⚫ High ESD Protection on DP/DM. ⚫ Support Samsung Galaxy tab Devices Charging. ⚫ MSOP10 Package. |
⚫ Guarantee Operation Temperature range from -40°C to 85°C