The F81486 is half-duplex RS485 transceiver that operates at maximum data rates of 20Mbps. The F81486 package is in 12-DFN (3x3 mm) and operating temperature is from -40 to 125゜C
The F81486 operates from 3.0V to 5.5V bus supply, while the logic supply voltage range is 1.2V to 5.5V. The wide common-mode voltage and low input leakage on bus pins makes the devices suitable for multi-point applications over long cables run.
All receivers have advanced failsafe protection to prevent oscillation when inputs are un- connected by defaulting to logic high output level. No external biasing resistors and termination resistors are required.
Meets or exceeds the requirements of the TIA/EIA-485 standard.
Support operating voltage (VCC) from 3.0V to 5.5V
Support I/O power voltage (VIO) from 1.2V to 5.5V on logic side
Data rate up to 20Mbps (Max. Load 47pF)
RS-485 advance failsafe on open, short or terminated lines
No external biasing resistors and termination resistors are required for RS-485
Robust ESD protection: ±15kV ESD protection (IEC 61000-4-2 Air Gap; ±8kV contact)
Flexible 2 internal resistors switched by RT pin (pin 8)
±16.5V receiver input voltage range
-7V to 12V bus common mode range permits
±7V ground difference between devices on the bus
12 DFN (3mm x 3mm) packaging