F81536 is the ideal bridge between USB to 12 UART controllers and which is complies with USB 2.0 as well as the standard serial port specification. Each UART includes 128-byte send/receive FIFO, a baud rate generator, complete modem control capability an interrupt system.
The F81536 will enter suspend mode when suspend signaling is detected on the bus. The F81536 exits the suspend mode when any of the following occur: resume signaling is detected or generated, a USB Reset signal is detected, or a device reset occurs.
The device built in +1.8V & +3.3V LDO regulators.
- FEATURES
- PACKAGE
- ATTACHMENTS
➢ Support the twelve RS-232/RS-485/RS-422 Serial interface with the transfer Data Rate & Baud Rate
➢ All UARTs Support HW Auto Flow Control Function
➢ 128-byte Receive/Send FIFO
➢ Support USB 2.0 Specification High Speed (480Mbps) & Full Speed (12Mbps)
➢ Built in 1.8 & 3.3V LDO
➢ Support USB Suspend & Resume Conditions Via RI# pins
➢ Support External Crystal 12MHz
➢ Support Plug & Play
➢ Support 9-bit protocol
➢ Support -40°C~85°C Industrial Temperature Range
➢ ESD Protection: HBM ± 2KV, MM ± 200V, CDM ± 500V, Latch-up Free
➢ Related USB Drivers are Available