The F72815 is a high-efficiency synchronous buck PWM controller with an adjustable reference voltage input to provide an option for over voltage function, which generates logic-supply voltages in PC based systems. This high-performance , single output device includes internal soft-start, frequency-compensation networks, power good signal with delay, and integrates all of the control, output adjustment, monitoring and protection functions into a single package. This device operates at a fixed frequency, 300K Hz and provides an optimum compromise between efficiency, external component size, and cost. Adjustable over-current protection (OCP) monitors the voltage drop across the RDS (ON) of the lower MOSFET for synchronous buck PWM DC-DC controller. The over-current function cycles the soft-start in 4-times hiccup mode to provide fault protection, and in a routine hiccup mode for under-voltage protection.
Provides one synchronous rectified buck DC-DC PWM controller
- Fast transient response (high bandwidth error amplifier; full 0~80% duty cycle)
- Fixed operation frequency : 300KHz
- Single loop voltage-mode control
- Few external components
- Output range adjustable down to 0.6V
Operatesunder 5V to 12V input
Drives all low cost N-channel MOSFETs
Uses MOSFET RDS(ON) as over currentmonitor, and no current sense resistor is required
Internal soft-start (typically 3 ms)
Internal loop compensation
Under voltage fault monitoring and protection
Over voltage protection
Adaptive Non-Overlapping Gate Driver
Adjustable Reference Voltage Input for Over Voltage Function, Input Range: 0.6~1.8V, under 0.5V shutdown
8-SOP package (150 mil)