The F75383/F75384 is a temperature sensor IC with alert signal which is specific designed for notebook, graphic cards etc. An 11-bit analog-to-digital converter (ADC) was built inside F75383/F75384. The F75383/F75384 can monitor two set of temperature which is very important for the system to work stably and properly. This chip provides 1 remote temperature sensor and 1 local temperature sensor. The remote temperature sensorcan be performed by CPU thermal diode or transistor 2N3906. The users can set up the upper and lower limits (alarm thresholds) of all monitored parameters and this chipcan also issuewarning messages for system protection when there is something wrong with monitored items.
Through the BIOS or application software, the users can read all the monitored parameters of system all the time. And a pop-up warning can be also activated when the monitored item was out of the proper/pre-setting range. The application software could be Fintek's application utility, or other management application software. The F75383/F75384 is in the package of 8-pin MSOP/SOP and powered by 3.3V.
- FEATURES
- PACKAGE
- ATTACHMENTS
-
Provide 1 on-chip local and 1 remote temperature sensing
-
±1 oC accuarcy on remote channel and ±3 oC accuarcy on local channel
-±1 oC (+60 oC to +100oC, remote)
-±3 oC (+60 oC to +100oC, local)
-
ALERT# output for SMBus alert
-
THERM# output for over temperature alert or for system shut down
-
Programmable THERM# limits and THERM# hysteresis
-
Programmable alert queue
-
Programmable limited and setting points(alert threshold) for all monitored items
-
2 wire SMBus interface
-
3VCC operation and in 8-SOP/8-MSOP green class package
-
8-MSOP Package – F75383M/F75384M ; 8-SOP Package – F75383S/F75384S
-
The difference between F75383 and F75384 is SMBus address ID and they have the following SMBus slave address:
|
A6 |
A5 |
A4 |
A3 |
A2 |
A1 |
A0 |
|
|
F75383 |
1 |
0 |
0 |
1 |
1 |
0 |
0 |
|
F75384 |
1 |
0 |
0 |
1 |
1 |
0 |
1 |